Minimum Bending Radius For permanent
bending
At 0.25 mm�
Flexing 7.5x cable �
Fixed 4x cable �
At 0.5 - 1.0 mm�
Flexing 10x cable �
Fixed 5x cable �
Coupling Resistance Max.
250 Ohm/km
Radiation Resistance Up
to 100x106 cJ/kg
(up to 100 Mrad)
Approvals
Cable
Construction
Bare copper
conductor, fine wire to DIN VDE
0295 cl. 6, col. 4, BS 6360 cl.
6 and IEC 60228 cl. 6
Polyolefin conductor
insulation
Color coded
to DIN 47100
Conductors stranded
in pairs, pairs stranded torsion-free
in layers with optimal lay length
Conductor wrapping
between the layers of stranding
Braided
shielding of tinned copper wires, coverage
approx. 85%
Conductor wrapping
with fleece
Full
polyurethane outer
jacket TMPU acc. to DIN VDE
0281 Part 10, Annex A and acc.
to UL Std. 1581 Tab. 50227
+80�C/+176�F
Jacket color:
Gray (RAL 7001)
Application
Stranded
in pairs, these fully-shielded
special track cables (for
drag chains) can also be
used where external, high
-frequency interference influences
pulse transfer. They are
used for permanently flexible
stresses in machine and tool
building, robot technology,
on constant moving machine
components and as
a BUS cable for
extended use in multi shift
operations.
Developed to state-of-the-art
technology, these highly flexible
data cables, with gliding TPE
conductor insulation and a cut resistant
and low-adhesion PUR outer
jacket, guarantees optimal
service life and extremely
good cost efficiency. This
two-approvals single-conductor cable
is preferred for use in export-oriented
mechanical engineering, in
machine tools, production lines
and systems engineering. Guaranteed
extended use in multi-shift
operations with extremely high
bending stresses. EMI =
Electromagnetic
Interference
To optimize the EMI characteristics
we recommend a large area of
contact of the copper braiding
around the entire circumference
on both ends.
=
The
product
is
conformed
with
the
EC
Low-Voltage
Directive
2006/95/EG.
Properties
Flame-retardant outer jacket
acc. to VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent to
DIN VDE 0472 Part 804 Test Method
B)
Very good oil resistance
Weather, ozone and UV-resistant
Chemical resistance to solvents,
acids, alkalis and hydraulic fluids
The materials used in manufacture are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers
Advantages
Very high resistance
to mechanical stresses
Very good alternating
bending strength
High tear,
abrasion and impact resistance,
even at low temperatures
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
Conduit System
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.