  |
| Mi Distribution boards are arranged side by side according to the assembly draft. |
|
 |
| Knock out box walls
to provide electrical
connection inside
the distributors. |
|
 |
| Knock out appropriate openings of wedge joints for the assembly of boxes. |
|
 |
| A self-adhesive wall gasket is stuck to box wall to seal boxes in position (also applies to closed box walls). |
|
 |
| Boxes are assembled through wedge connections. Screws M6 x 15 may be used instead of wedges. |
|
 |
| The wall clamp is pressed onto the box fins to increase the rigidity. |
|
 |
| Wall separator for subdivision of 300 mm box walls into 2 x 150 mm for flange or box mounting. |
|
 |
| Cable entry via Flanges. |
|
 |
| Assembly of flanges by with four fastening wedges on the box wall. |
|
 |
| Knockout for Cable entry with a screw driver - wrong way. |
|
 |
| Knockout for Cable entry with a screw driver - right way. |
|
 |
| Respective box wall is knocked out and the upper box fin next to the wedge fastening is sawed out. |
|
 |
| Then the cable insertion is screwed on and rubber entries are fitted. |
|
 |
| The cable is inserted into the box from the front. |
|
 |
| Subsequent installation of upper box fin - 1. |
|
 |
| Subsequent installation of upper box fin - 2. |
|
 |
| Subsequent installation of upper box fin - 3. |
|
 |
| Installation devices can be fastened on mounting plates with self-threading screws. |
|
 |
| DIN Rail fastening on Mi DS 50 Spacers - 1. |
|
 |
| DIN Rail fastening on Mi DS 50 Spacers - 2. |
|
 |
| Pre-drill sections in the corners, then saw away sections from the protection plate by using a piercing saw with coarse toothed saw blades for plastics. |
|
 |
| Screw on the support for the protection plate Mi EP 02 at the base of the box. |
|
 |
| Put on the protection plate. |
|
 |
| Blanking strips (attached) for unused equipment openings in protection covers. |
|
 |
| PE and N terminals for copper conductors (installed). |
|
 |
| Dimensions of module, 1 module = .71" (18 mm) wide |
|
|
Enclosures: IP Rated
Thermoplastic: D & K Series 
Hinged Enclosures
