BSP Non-Swivel models and customized NPTF models not shown in catalog, or hybrids
1. Older style flow-control valves with banjo tube/thread connections and stud valve types may be assembled in
a variety of combinations.
Select any stud valve flow-control type; Meter-In, Meter-Out, or Needle -Orifice with either Manual or
Screwdriver adjustment, ( i.e. MCU-, SC U-, MVU-, SV U-, MCO -, SCO - from BSP flow control body offering).
Select desired banjo connection, either inch OD, metric/mm OD, metric compression, female thread or silencer
ring from banjo offerings in Fittings section of catalog , ( i.e. 6610 04-02, 6610 6-1/8, 2023 02-02,
2023 1/4-1/4, 1610 6/4-1/8, 2905 1/4, etc.)
Select thread adapter to "close" the final assembly and hold banjo in place, ( i.e. 2520 02-1/8, 2520
04-1/4, 2520 1/4-1/4, 2520 1/8-1/8), depending on final thread choice of BSP or NPTF threads.
Technical Specifications
Construction
needle type, right angle banjo assembly
Valve group
unidirectional and bidirectional controller
Materials
OT58 nickel-plated brass body and threads - Buna-N seals, Nylon® gaskets.
Mounting
by male thread
Ports
M5 - G1/8 - G1/4 - G3/8 - G1/2
Installation
in any position
Operating temperature
0 to 80°C (with dry air -20°C) (32°F — 175°F, with dry air -4°F)
Lubricant
compatible with Buna-N (3° — 10° E)
Pneumatic Data
Operating pressure
from 1 to 10 bar (14.5 - 145 psi)
Nominal pressure
6 bar (87 psi)
Nominal flow
see graph
Nominal diameter
M5 = 1.5 mm (.059") G1/8 = 2 mm (.078") G1/4 = 4 mm (.157")
G3/8 = 7 mm (.275") G1/2 = 12 mm (.472")
Fluid
filtered air
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
Fittings
Valves
