(single part number codes, fully assembled)
Ports 3/4" - 1" NPTF
Assembly can be specified with either standard modular brackets
and/or integrated wall-mount brackets
The new FRL Series MX can be easily
assembled through rapid clamps
which allow the connection among
single components creating an
unlimited number of compositions.
The FRL groups Series MX are also
available in the already mounted
version (with a single code).
The use of three different types of
rapid clamps (standard, with wall
mounting screws or with wall-mount
brackets) allows an easy mounting of
the assembled groups and to carry
out maintenance operations on the
single components with no need to
disassemble the group.
Compact design
Simple modularity
Great reliability and performance
Easy and quick maintenance
Reduced weight
Configuration of the assembled group in the drawing below:
MX3-1-V01XF00XFR0004YL00XV16-KK
Numbers in above position boxes refer to positions called out in the Code Key. Each number is called out in
order of the components' thread size and assembly order, including bracket choices.
Position 1
is for general family body size (in this case, 3)
Position 2
is for thread port size options (in this case, 1" ports)
Position 3
is the first component (in this case, a "...-V01" lock-out valve)
Positions 4 & 5
will continue to repeat for each additional component and the bracket that typically comes before it
Position 6
is final outer edge bracket choices, with or without flange units
Position 7
is only for optional right-to-left assembly/flow diagram requests
Positions 3 & 5
will require in most cases that the entire callout of the module be assembled with its unique features (such
as the above filter-regulator called out as "FR0004")
Positions 4 & 6
outer brackets and intermediate brackets, utilize the same abbreviated letters for bracket styles, EXCEPT if
wall-mount flanges are desired (see Code Key place "6" for options - 'HH' 'JJ' and 'KK' for the end bracket sets to include the
wall flange kits)
Coding Example
Coding Example
MX
3
1
V01
X
F00
KK
LH
TF
MX
Series
3
(1)
Size
3 = 3/4" - 1" NPTF
1
(2)
Inlet / Outlet Threads 3/4 = 3/4" 1 = 1"
V01
[*]
(3)
Module (for the modules configuration, see pages referring to the single component) F = Filter FC = Coalescing filter FCA = Activated carbons filter R = Pressure regulator L = Lubricator FR = Filter-Regulator V = Lockable isolation valve AV = Soft start valve B = Take-off block (1" only)
X
(4)
Modules Connection X = Rapid clamp kit, (standard clamp kit) Z = Rapid clamp kit with wall mounting screw, (std brackets w/ 1 long and 1 short screw for direct wall mount) Y = Rapid clamp kit with wall mounting brackets , (eyelets on bracket for bolting)
F00
[*]
(5)
Module (for the modules configuration, see pages referring to the single component) F = Filter FC = Coalescing filter FCA = Activated carbons filter R = Pressure regulator L = Lubricator FR = Filter-Regulator V = Lockable isolation valve AV = Soft start valve B = Take-off block (1" only)
KK
[**]
(6)
Terminal Connections according to the positioning scheme on the following pages Blank = no terminal connection XX = no. 2 rapid clamps kits ZZ = no. 2 rapid clamps kits with wall mounting screw YY = no. 2 rapid clamps kit with wall mounting brackets HH = no. 1 rapid clamp kit with flanges (IN / OUT) JJ = no. 1 rapid clamp kit with wall mounting screws + flanges (IN / OUT) KK = no. 1 rapid clamp kit with wall mounting brackets + flanges (IN / OUT)
LH
(7)
Flow Direction Blank = from left to right (standard) LH = from right to left ( on request, insert code suffix)
TF
TF = NPTF ports
ADDITIONAL INFORMATION FOR THE ASSEMBLED GROUP CONFIGURATION:
(4)
+
(5)
Repeatable Combination (for a "N" number of times)
[*]
ACCESSORIES (to be added after every single module):
Take-off Block
+A06 = PM11-NA with fitting for fixing to the module
+A07 = PM11-NC with fitting for fixing to the module
+A02 = PM11-SC with fitting for fixing to the module
[**]
Wall Connection (required when Regulator or Filter-Regulator are the first/last units of an assembly - see online configurator for
clarification)
Regulator and Filter-Regulator
S = Bracket (only with clamps mod. X or HH)
Codes examples: MX3-1-R..XV..-S; MX3-1-R..XV..-HSH
Part No. Ex.:
MX3-3/4-V01XF00XFR0000YL00XV16-KK TF
Notes:
3/4" NPTF unit, w/o silencers
or switch accessories.
Utilizing wall-mount brackets and flange endplates
Part No. Ex.:
MX3-1-V01XF00XFR0000YL00XV16-HH TF
Notes:
1" NPTF unit, w/o silencers
or switch accessories.
Utilizing only rapid mounting clamps
and flange end-plates.
Legend of the ASSEMBLED GROUPS DRAWINGS:
"Y" = with standard brackets and with wall mounting brackets (MX3-Y) and flange end-plates
"Z" = with standard brackets and with wall mounting screw brackets (MX3-Z) and flange end-plates
G = Wall-mount holes
Dimensions (in Inches)
Part Number
A
B
C
D
F1
F2
L
M
MX3-YTF
10.512
7.008
3.228
6.299
2.677
1.594
-
-
MX3-ZTF
10.512
7.008
1.063
-
1.594
1.594
0.512
M6
Technical Specifications
Construction
modular, compact
Materials
see sections referring to the single component
Ports
3/4" - 1" NPTF
Mounting
vertical in-line,
wall-mounting (by means of direct screws or bracket mounts),
panel mounting
Operating temperature
-5°C - 50°C at 16 bar (according to the single component characteristics)
50°C - 60°C at 10 bar (according to the single component characteristics)
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
Fittings
FRL Units - Filters, Regulators & Lubricators
The new FRL Series MX can be easily
assembled through rapid clamps
which allow the connection among
single components creating an
unlimited number of compositions.
