Radiation Resistance Up to
80x106 cJ/kg
(up to 80 Mrad)
Coupling Resistance Max. 250
Ohm/km
Approvals
Cable
Construction
Bare copper, fine wire
conductors according to DIN VDE 0295
cl. 5, BS 6360 cl. 5 and IEC 60228 cl.
5
Special PVC conductor insulation
TI2, to DIN VDE 0281 part 1
Black conductors with sequential
numbering imprinted in white, according
to DIN VDE 0293
Green-yellow earth
conductor in the outer layer (3 conductors and
above)
Conductors stranded in layers
with optimal lay-length
PVC-insulated inner
jacket
Braided shielding of tinned
copper wires, coverage approx. 85%
Special PVC outer jacket
TM2, to DIN VDE 0281 part 1
Color: Black (RAL 9005)
Application
Wiring cable
for measuring and controlling purposes
in tool machinery, conveyor belts
and production lines, for plant
installations, air conditioning
and in steel production plants
and rolling mills. Suitable for
installation for flexible use for
medium mechanical stresses with
free movement without tensile stress
or forced movements in dry, moist
and wet rooms as well as outside
(fixed installation). Is not suitable
to be used as direct burial or
as underwater cable. The conductors
have been numbered in such a way
that the numbers are easily identifiable,
even if the cable has only been
stripped back a few cm. The conductor
numbers have been underlined to
avoid confusion. The grounding
is located in the outer layer.
The black, special PVC outer jacket
is resistant to the ultra violet
radiation. Mainly used in South-European,
Eastern and Arabian countries.
Interference-free transmission
of signals and pulses is assured
by the high degree of shielding. EMI =
Electromagnetic Interference
To optimize the EMI features we recommend
a large round contact of the copper
braiding on both ends. =
The product is conformed
with the EC Low-Voltage
Directive 73/23/EEC and
93/68/EEC.
Properties
Extensively oil resistant
For Chemical Resistance, see table Technical
Information
PVC self-extinguishing
and flame retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent DIN VDE 0472
part 804 test method B)
The materials used in manufacture are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers
Resistant to ultra
violet rays
Note
G = with green-yellow
grounding
x = without green-yellow grounding (OZ)
Further sizes are available
upon request
AWG sizes are approximate
equivalent values. The actual cross-section
is in mm�.
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
All-weather, Rubber & Welding
Control Cable
PUR Control Cable, Unshielded
=
The product is conformed
with the EC Low-Voltage
Directive 73/23/EEC and
93/68/EEC.
