https://www.hitechcontrols.com/camozzi/valves/overview.html

Camozzi realizes the importance of these valves especially as actuator performance depends essentially on the right choice of automatic valve. The range includes flow regulators, quick release valves, flow control valves, basic logic functions and silencers with different specifications in order to meet most requirements.

The Camozzi Valves cover the following products:

• Exhaust Valves Series VNR, VSC, VSO – NPTF/Inch Sizes Pilot-operated
• Check/Blocking Valves Series VBO-VBU – NPTF/Inch Sizes
• Composite Right Angle –  Flow Control Valves Series TMCU-TMVU-TMCO – NPTF/Inch Sizes
• Right Angle Flow Control Valves Series GSCU-SCU, GMCU-MCU, GSVU-SVU, GMVU-MVU, GSCO-SCO, GMCO-MCO – NPTF/Inch Sizes
• In-Line Flow Control Valve Series RFU – NPTF/Inch Sizes
• Ball Valves Full Flow Design Series 2940, 2930 – NPTF/Inch Sizes
• Ball Valves – Full Flow Design Series 2960, 2930-N (Nickel Plated) – NPTF/Inch Sizes
• Check & Quick Exhaust Valves Series SCS-VNR-VSC-VSO – BSP/Metric Sizes
• Pilot-operated Check/Blocking Valves Series VBO-VBU – BSP/Metric Sizes
• Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO – BSP/Metric Sizes
• Right Angle Flow Control Valves Series SCU-MCU-SVU-MVU-SCO-MCO – BSP/Metric Sizes
• Right Angle Flow Control Valves Series GSCU-GMCU-GSVU-GMVU-GSCO-GMCO – BSP/Metric Sizes
• In-Line Flow Control Valve Series RFU-RFO – BSP/Metric Sizes
• Needle Valve Series 28 – BSP/Metric Sizes
• Tubing & Accessories Silencers – BSP/Metric Sizes
• Adjustable Diaphragm Pressure Switches Series PM, Electro-Pneumatic Transducer Series TRP, Pressure Indicators Series 2950 – BSP/Metric Sizes
• Logic Valves Series 2L – NPTF/Inch Sizes
• Pneumatically Operated Amplifier Valve Series 2L – BSP/Metric Sizes

https://www.hitechcontrols.com/camozzi/cylinders/series-61/series-61-overview.html

Permanent magnet, mounted on the piston in these cylinders, info is received regards of piston position due to proximity switches mounted in grooves along profile.  Has adjustable end-stroke and mechanical cushioning

https://www.hitechcontrols.com/camozzi/cylinders/series-60/series-60-overview.html

The Series 60 cylinders have been designed to comply with the dimensions laid down in the ISO 15552 standards. A permanent magnet, mounted on the piston, enables information to be received regarding the piston position by means of proximity switches positioned along the cylinder tube.

This cylinders series is normally equipped with adjustable end-stroke cushioning. Moreover these cylinders are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke.

• DIN/ISO 6431 VDMA 24562
• Rolled stainless steel rod
• Adjustable pneumatic cushioning